Melink Corporation is passionate about supporting the HVAC industry through its clean energy solutions. To share our field knowledge in commercial kitchen ventilation, as well as test and balance, several employees serve on professional boards like the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE).
What is ASHRAE?
ASHRAE is a professional association to advance the design and construction of heating, ventilation, air conditioning, and refrigeration systems. The international group has more than 50,000 members in more than 130 countries. Most members are building service engineers, architects, mechanical contractors, building owners, and equipment manufacturers. ASHRAE is known for supporting research projects, offering education programs, and publishing technical standards.
Overall, ASHRAE’s technical standards support safety, occupant health, and energy efficiency. These standards establish consensus for testing methods for use in commerce, as well as the performance criteria to guide the industry. ASHRAE publishes the following three types of voluntary consensus standards:
- Method of Measurement or Test (MOT)
- Standard Design
- and Standard Practice.
ASHRAE does not write rating standards unless a suitable rating standard will not otherwise be available. ASHRAE is accredited by the American National Standards Institute (ANSI) and follows ANSI’s requirements for due process and standards development.
Melink & ASHRAE
For many years, Melink Corporation has supported ASHRAE. Employee-owners, including CEO Steve Melink, have written journal articles, technical standards, and presented at conferences. Most recently, Jason Brown (Senior Sales & Applications Engineer) and Bryan Miller (Vice President of Technology) have volunteered their time and expertise.
Here’s a closer look at Melink’s support of ASHRAE:
- ASHRAE operates through committees. Through the committee structure, members decide policy, develop procedures, and direct the organization’s activities. Brown and Miller have been active for several years on two ASHRAE committees. Brown is a voting member of the following committees, meaning he has influence on what does and doesn’t pass in the committee proceedings:
Technical Committee on Commercial Kitchen Ventilation (TC 5.10) Technical Committees (TC) are responsible for identifying research topics, proposing research projects, selecting bidders, and monitoring research projects funded by ASHRAE. Information about research programs is discussed at each TC meeting and at the TC’s Research Subcommittee meeting. For instance, the TC 5.10 Committee, in which Brown serves, is concerned with the design, construction installation, commissioning, and sustainable operation of code-compliant commercial kitchens. The committee is also involved with revisions/updates to model codes such as the International Mechanical Code (IMC) and writing/revising ASHRAE Standards. Additionally, the TC develops sessions for ASHRAE’s winter and annual conferences.
Standards Committee for Commercial Kitchen Ventilation (SSPC 154) This Standards Committee provides design criteria for the performance of commercial cooking ventilation systems in regard to kitchen hoods, exhaust systems, and replacement air systems. Serving on this committee primarily has entailed attending and participating in meetings that occur twice per year.
- Brown and Miller have assisted with updating sections of the ASHRAE Handbook. The ASHRAE Handbook is a series of four volumes covering HVAC Applications, Refrigeration, Fundamentals, and HVAC Systems 7 Equipment. One volume is revised each year, ensuring that no volume is older than four years. In relation to the committees previously mentioned, TC 5.10 is responsible for Chapter 34 (Kitchen Ventilation) of the ASHRAE HVAC Applications Handbook, which was last revised in 2019. The chapter focuses primarily on kitchen ventilation systems in restaurants and institutional food service facilities. Brown and Miller provided content and graphics about demand control kitchen ventilation (DCKV) systems and variable frequency drives. In addition, for other handbooks, they have provided content on HVAC test and balance commissioning.
- Brown and Miller attend the Cincinnati ASHRAE Chapter meetings to represent Melink at the local level.
- For further professional development, the Melink employee-owners have attended ASHRAE’s conferences. “Normally we meet biannually for a few days in conference settings, but we have a few virtual meetings in between to vote and discuss topics that are requiring attention in the industry,” said Brown.
To learn more about how Melink employee-owners influence their industry, check out our blog.